FORTINET NSE6_FSW-7.2 CERTIFICATION TRAINING | NSE6_FSW-7.2 LATEST EXAM LABS

Fortinet NSE6_FSW-7.2 Certification Training | NSE6_FSW-7.2 Latest Exam Labs

Fortinet NSE6_FSW-7.2 Certification Training | NSE6_FSW-7.2 Latest Exam Labs

Blog Article

Tags: NSE6_FSW-7.2 Certification Training, NSE6_FSW-7.2 Latest Exam Labs, Questions NSE6_FSW-7.2 Exam, Valid NSE6_FSW-7.2 Exam Sims, Valid Test NSE6_FSW-7.2 Testking

You can overcome this hurdle by selecting real Fortinet NSE6_FSW-7.2 Exam Dumps that can help you ace the NSE6_FSW-7.2 test quickly on the maiden endeavor. If you aspire to earn the Fortinet NSE6_FSW-7.2 Certification then obtaining trusted prep material is the most significant part of your NSE6_FSW-7.2 test preparation.

The Fortinet NSE6_FSW-7.2 Exam consists of 45 multiple-choice questions that need to be completed within 60 minutes. To pass the exam, candidates must obtain a minimum of 70% score. Fortinet NSE 6 - FortiSwitch 7.2 certification is valid for two years, and candidates need to recertify to keep their certification current. Fortinet NSE 6 - FortiSwitch 7.2 certification is a valuable asset for individuals and organizations that use Fortinet products as it demonstrates that the certified professional has the expertise to manage and configure FortiSwitches effectively.

>> Fortinet NSE6_FSW-7.2 Certification Training <<

NSE6_FSW-7.2 Certification Training - Fortinet NSE6_FSW-7.2 Latest Exam Labs: Fortinet NSE 6 - FortiSwitch 7.2 Finally Passed

Fortinet NSE6_FSW-7.2 practice test VCEPrep is another great way to reduce your stress level when preparing for the Fortinet Exam Questions. With our VCEPrep, you can practice your excellence and improve your competence on the NSE6_FSW-7.2 exam dumps. Each NSE6_FSW-7.2 practice exam, composed of numerous skills, can be measured by the same model used by real examiners. Fortinet NSE6_FSW-7.2 has real NSE6_FSW-7.2 exam questions. You can change the difficulty of these questions, which will help you determine what areas appertain to more study before taking your NSE6_FSW-7.2 exam dumps.

Fortinet NSE6_FSW-7.2 Exam is a vendor-specific certification exam that is recognized globally. Successful completion of the exam demonstrates that the candidate has the skills and knowledge required to manage and maintain Fortinet switches in an enterprise environment. It is an essential certification for IT professionals who work with Fortinet network security solutions.

Fortinet NSE 6 - FortiSwitch 7.2 Sample Questions (Q37-Q42):

NEW QUESTION # 37
Refer to the exhibit.

The exhibit shows the current status of the ports on the managed FortiSwitch. Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?

  • A. A standalone switch with the shown serial number is connected on port23.
  • B. Ports connected to adjacent FortiSwitch devices show their serial number as the native VLAN.
  • C. port23 is a member of a trunk that uses the Access-1 FortiSwitch serial number as the name of the trunk.
  • D. port23 is configured as the dedicated management interface.

Answer: A

Explanation:
The information in the "Native VLAN" column for port23 on the FortiSwitch indicates that a standalone switch is connected to it. This is because the column displays "$424MPTF20000027," which matches the format of a Fortinet device serial number.
Here's a breakdown of the evidence in the image:
Native VLAN: The "Native VLAN" column typically displays the VLAN ID for untagged traffic on a trunk port. However, in this case, it shows a serial number format ("$424MPTF20000027").
No Trunk Information: The "Trunk" column is blank for port23, indicating it's not configured as a trunk member.
Other Ports: Port1 and port2 show "default" in the "Native VLAN" column, which is the expected behavior for access ports.
Fortinet FortiSwitch devices typically don't display the serial number of adjacent FortiSwitch devices in the "Native VLAN" column. This column is reserved for VLAN information on trunk ports.


NEW QUESTION # 38
Which statement about using MAC, IP, and protocol-based VLANs on FortiSwitch is true?

  • A. FortiSwitch uses only the Ethernet type to assign traffic to VLANs.
  • B. It provides benefits that can be obtained when using 802.1X authentication.
  • C. lt is a scalable and secure solution in comparison to other Layer 2 security measures.
  • D. Endpoints are required to use the same FortiSwitch port to remain members of the VLAN.

Answer: B


NEW QUESTION # 39
Which two statements about the FortiLink authorization process are true? (Choose two.)

  • A. A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization.
  • B. The administrator must manually pre-authorize FortiGate on FortiSwitch by adding the FortiGate serial number.
  • C. FortiSwitch requires a reboot to complete the authorization process.
  • D. FortiLink authorization sets the FortiSwitch management mode to FortiLink.

Answer: A,D

Explanation:
The FortiLink authorization process is an integral part of setting up FortiSwitch to be managed by FortiGate. The correct statements regarding the FortiLink authorization process are:
C . A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization. This is a part of the FortiLink protocol, where FortiGate communicates with the connected FortiSwitch to establish management and control. This frame initiates the configuration and management process, allowing FortiGate to effectively control the switch.
D . FortiLink authorization sets the FortiSwitch management mode to FortiLink. Once authorized, the management mode of FortiSwitch is set to FortiLink, indicating that it is being managed via a FortiLink connection from a FortiGate appliance. This changes the operational mode of the switch to be under the control of the FortiGate for centralized management and policy application.
Reference:
Further details on the FortiLink setup and authorization process can be accessed through the FortiGate configuration guides available on the Fortinet Documentation site.


NEW QUESTION # 40
Which QoS mechanism maps packets with specific CoS or DSCP markings to an egress queue?

  • A. Classification for ingress traffic
  • B. Marking for ingress traffic
  • C. Queuing for egress traffic
  • D. Rate limiting for egress traffic

Answer: A

Explanation:
"Classification: FortiSwitch maps packets with a given CoS or DSCP marking to an egress queue. There are eight egress queues on each port: queues 0 to 7." In Quality of Service (QoS) mechanisms, the process of mapping packets with specific CoS (Class of Service) or DSCP (Differentiated Services Code Point) markings to an egress queue involves two key steps: classification and queuing .
Classification : This occurs on the ingress side (incoming traffic). The switch examines the packet headers (e.g., CoS or DSCP values) to determine how the traffic should be treated. Based on this classification, the switch assigns the packet to a specific priority level or queue.
Queuing : Once the packet is classified, it is mapped to an egress queue based on its priority level. The egress queues are used to manage how traffic is transmitted out of the switch.
Option A (Queuing for egress traffic) refers to managing how packets leave the switch, but it does not involve the initial mapping of CoS/DSCP values to a queue.
Option C (Rate limiting for egress traffic) is about controlling the rate of outgoing traffic, which is unrelated to CoS/DSCP mapping.
Option D (Marking for ingress traffic) involves modifying the CoS or DSCP values of packets as they enter the switch, but it does not map them to an egress queue.
Thus, classification for ingress traffic is the mechanism that identifies and maps packets with specific CoS or DSCP markings to an appropriate egress queue.


NEW QUESTION # 41
How are the 'by VLAN redirect MAC address quarantine' mode and the 'by redirect MAC address quarantine' mode on FortiGate similar?

  • A. Both modes require firewall policies to block inter-VLAN traffic.
  • B. Both modes add quarantined device MAC addresses to the blocked firewall address group.
  • C. Both modes block intra-VLAN traffic by FortiGate automatically.
  • D. Both modes move quarantined devices to the quarantine VLAN.

Answer: C


NEW QUESTION # 42
......

NSE6_FSW-7.2 Latest Exam Labs: https://www.vceprep.com/NSE6_FSW-7.2-latest-vce-prep.html

Report this page